|
|
 |
Tracy's Third HFS |
 |
Page #8 of 9
"Don't believe anything I say; learn about what I say and prove it to yourself!"
by Tracy Jones
The top one shows the skin on. I screwed the skin into a 1 by 1/8 inch strip that was screwed on to the edge of the plywood at the top and bottom. I then used brass machine screws to hold the skin in place. The second shows the edge I cut and attached to the upper structure cover and the skin. I also used screws to attach this. The third is a picture out of sequence and is self explanatory. The fourth shows my rejection magnet in place atop the suspended magnet. The long strips you see on the side of the cone were used to hoist the cones.
 |
 |
 |
 |
|
|
|